Supplier
Nov 6, 2015

STMicroelectronics' HTS221 is an ultra-compact sensor for relative humidity and temperature. It is available in a small top-holed cap land grid array package.

Nov 6, 2015

Diodes' AH2985 includes a Hall effect sensor, dynamic offset correction and two complementary open-drain output drivers with internal Zener diode protection.

Nov 6, 2015

Vishay Dale's Power-Pole PCA (printed circuit assembly) provides a reconfigurable totem-pole circuit to conduct several experiments in the Power Electronics Lab, based on the approach in the textbook Power Electronics: Converters, Applications and Design.

Nov 6, 2015

Diodes' AP3127/H current mode PWM controllers are optimized for high-performance and cost-effective quick charge application systems and are available in the SOT26 package.

Nov 6, 2015

Diodes' AP91352 is a self-protected resettable electronic fuse designed for consumer applications such as hard-disk drives and industrial applications to enhance system reliability against catastrophic and shutdown failures.

Nov 6, 2015

TE Connectivity's rectangular DC jacks deliver power quickly, compared to circular DC jacks, to any battery operated device with up to 25 V and 10.7 A ratings.

Nov 5, 2015

Phoenix Contact's M12 housing shell compensates process-related production tolerances for two-piece device ports.

Nov 5, 2015

Linear Technology's LTC5549 is a general purpose passive double balanced mixer that can be used for up conversion or down conversion.

Nov 5, 2015

Linear Technology's LT6657 is a precision voltage reference that combines robust operating characteristics with extremely low drift and low noise.

Nov 5, 2015

Maxim's MAX44211 is a low-distortion line driver customized for powerline communication (PLC) applications where high output current is needed to drive the isolation and coupling transformer under varying load conditions.

Nov 5, 2015

Maxim's MAX14890E incremental encoder receiver contains four differential receivers and two single-ended receivers.

Nov 5, 2015

The AEC-Q101-qualified devices released today are manufactured using Vishay's new foil assisted mold (FAM) technology. The photodiodes' leadframe, bond wire, and connection pads are molded in a black epoxy, while a free cavity above the radiant sensitive area allows light to enter the package for signal generation.

Nov 5, 2015

Maxim's MAX17509 integrates two 3 A internal switch step-down regulators with programmable features. The device can be configured as two single-phase independent, 3 A power supplies or as a dual-phase, single-output 6 A power supply.

Nov 5, 2015

Linear Technology's LTC2387-18 is ideally suited for a wide range of applications.

Nov 5, 2015

Panasonic's thinnest sensor dimension of 3 mm 0.118 inch has been achieved by utilizing semiconductor packaging technology that does not use wire bonding.

Nov 5, 2015

Maxim's MAX11253 is a 6-channel, 16-bit delta-sigma ADC that achieves exceptional performance while consuming very low power. Sample rates up to 64 ksps allow precision DC measurements.

Nov 5, 2015

Phoenix Contact's SPTD series of terminal blocks have an easy spring connector and double level that saves PCB real estate.

Nov 5, 2015

Digilent's PmodMAXSONAR is an ultrasonic range detector that uses the MaxBotix LV-MaxSonar-EZ1™ sonar sensor to offer 1" resolution for distance sensing needs.

Nov 5, 2015

Maxim's MAX71020A is a single-chip analog front-end (AFE) for use in embedded energy measurement applications.

Nov 5, 2015

Maxim’s DS28E17 is a 1-wire slave to I²C master bridge device that interfaces directly to I²C slaves at standard (100 kHz max) or fast (400 kHz max).